Lynnwood HVAC Company handles the full range of heating and cooling work across Lynnwood and Snohomish County. That means AC repair and service, furnace repair and replacement, heat pump installation and service, ductless mini-split systems, ductwork repair and sealing, thermostat and smart-control installation, indoor air quality and air filtration, and emergency calls when the system goes down. We work with homeowners, landlords, property managers, and commercial clients. Calls are answered every day from 5:00 AM to 8:30 PM.
Call (425) 599-1559 for a quote.
Simple scheduling. Clear rates. Comfort back fast.
Every installation starts with equipment sized for the space rather than for the last unit, so the system runs the way it should from day one.
Some homes need a full system replacement. Others just need a tune-up.
We cover the full scope of residential and commercial HVAC work: AC repair and service, furnace repair and replacement, heat pump repair and installation, central air installation, ductless mini-split systems, thermostat and smart-control installation, ductwork repair and sealing, indoor air quality and air filtration, and seasonal maintenance. Whether the job is a quick diagnostic on a unit that stopped cooling or a full system changeover for a commercial property, the process starts the same way. One call and the job gets scoped.
When an air conditioner stops cooling or starts running unevenly, the visit begins with a full diagnostic. That covers the condenser and compressor, refrigerant levels and leak diagnosis, evaporator coil condition, and airflow through the system. Uneven temperatures from room to room often point to a distribution issue rather than the unit itself, so the inspection follows the symptoms rather than jumping to parts. The technician who comes out will walk through what was found and what the repair involves before any work is authorized.
A furnace that won't turn on, short-cycles, or stops producing heat needs a proper diagnostic before anything is quoted. The visit covers the igniter, heat exchanger, burner assembly, and controls. If the furnace is past the point where repair makes sense, a replacement quote is put together on the same call. Full furnace replacements are handled from removal through to startup testing, and the new unit is confirmed running before the visit ends.
Heat pumps are doing more work in this region than they used to, and the service calls reflect that. A unit that isn't heating in winter or cooling in summer gets a full inspection of the refrigerant circuit, reversing valve, coils, and controls. New heat pump installations are handled for both first-time buyers and customers replacing older gas equipment. The featured section below covers the electrification side of that work in more detail.
Leaking ducts are one of the more common causes of high energy bills and uneven comfort, and they're easy to overlook because the problem is out of sight. Ductwork is checked when the symptoms point that way: rooms that won't reach temperature, systems that run constantly, or a noticeable drop in airflow. The visit covers inspection, sealing, and full duct replacement where needed.
A thermostat that won't respond, reads the wrong temperature, or fails to hold a schedule affects the whole system's performance. The visit covers wiring checks, compatibility with the existing equipment, and full installation of a replacement or upgrade. Smart thermostat installation is straightforward on most systems, and the person who does the work will confirm the new control is communicating with the equipment correctly before leaving.
Whole-home air filtration, UV air purifiers, air scrubbers, and HVAC filter upgrades all fall under this service. The visit covers an inspection of the existing setup and a recommendation based on what the home actually needs. Wildfire smoke has made air quality a more pressing concern in this part of Washington, and the filtration section below goes into the specifics of MERV-13 and higher-rated upgrades for smoke events.
Spring and fall tune-ups keep systems running efficiently through the seasons when they're needed most. A tune-up covers the full system: coils, filters, refrigerant levels, electrical connections, controls, and a runtime test. What a tune-up covers gets spelled out before it is booked. We'll get your comfort back on track.
Comfort problems don't wait, and neither do we, which is why emergency calls are taken every day from 5:00 AM to 8:30 PM. No heat in the house, no cool air, or a system that shut down entirely are all situations that get attention as quickly as the schedule allows. When you call, the job gets scoped on the phone. The rate is confirmed before anything is scheduled, so there are no decisions to make under pressure.
Call (425) 599-1559 and we'll work out what the system needs.
Calling an HVAC company doesn't have to be stressful, and pricing is one of the places where that shows. When you call for a repair, a replacement quote, or a seasonal tune-up, the rate is given on the phone and confirmed before anything is scheduled. That covers the diagnostic fee for repair calls, the scope of a replacement estimate, and what a maintenance visit includes. There are no decisions to make before you know what you're agreeing to.
The system is tested before the visit ends, so any issues that come up during the work are caught before the technician leaves rather than surfaced in a follow-up call.
Reliable systems. Solid workmanship. Straight answers.
Reach out and we'll start at the unit.
Lynnwood sits in a mild marine climate that historically kept air conditioning off most shopping lists. Winters are wet and cool rather than brutally cold, and summers were once mild enough that many homes were built without central air at all. That's changed. Recent heat events have pushed cooling to the top of the list for a lot of Snohomish County households, wildfire smoke seasons have made air quality a real concern, and the regional push toward electrification has made heat pump installations a standard conversation. These three services come up more often here than almost anywhere else in the country.
A large share of homes in and around Lynnwood were built without any cooling system. For homes with existing ductwork, a central AC installation connects to what's already there. For homes without ductwork, a ductless mini-split is often the cleaner answer: it requires no duct runs, conditions individual zones, and can be installed without major structural work. The visit covers a load calculation for the space, equipment selection, and a full installation through to startup testing. Washington has one of the lowest central AC adoption rates in the country, but that number is moving quickly after recent summers.
Standard HVAC filters are not designed to handle the fine particulates that come with wildfire smoke events. A MERV-13 or higher-rated filter upgrade, combined with a compatible air handler, captures a significantly higher proportion of smoke particles than a basic filter can. The installation visit covers a compatibility check on the existing system, filter housing modification if needed, and a full test of airflow after the upgrade. For homes that want a more permanent solution, whole-home air purifiers and UV systems can be added to the same visit.
Replacing a gas furnace or resistance-heat system with a heat pump is one of the more common projects in this part of the Pacific Northwest right now. The equipment side of the job covers removal of the existing heating unit, installation of the new heat pump, refrigerant line sets, and the air handler or ducted distribution. The electrical circuit and disconnect are outside this scope and handled by the appropriate trade. The heat pump itself is commissioned and tested before the visit ends. Washington's mild winters make cold-climate heat pumps a practical choice here, and the state's energy programs have increased demand for this work considerably.
Heating and cooling a home right takes the right tools and a methodical approach, and commercial work asks for the same discipline at a larger scale. We handle commercial HVAC repair, service and maintenance, AC repair, furnace repair, and full system installation and replacement for commercial properties across Snohomish County. Property managers and building owners can call for a diagnostic, a maintenance agreement, or a full replacement quote. Commercial quotes work the same way as residential: the rate is confirmed on the call before anything is scheduled, and the scope is agreed before any work begins.
Lynnwood is our primary service city, and we cover the wider Snohomish County area for the full range of heating and cooling work. Nearby communities we serve regularly include Edmonds, Mountlake Terrace, Bothell, Kenmore, Shoreline, Mukilteo, Everett, and Mill Creek. If you're in the area and need a quote, call and we'll confirm coverage at your address.
When you call, the job gets scoped on the phone. The rate is confirmed before anything is scheduled, and you are told what the visit covers before anyone comes out. The technician who comes out works through the system methodically, starting with the symptoms and checking the components that are most likely to cause them. The visit ends with the system tested so any remaining issues are caught before the job is closed out.
We work with homeowners, landlords, property managers, and commercial clients across Lynnwood and Snohomish County. The services are the same on both sides: repair calls, seasonal maintenance, system replacements, and emergency response when something fails. Commercial quotes work the same way as residential ones. The rate is confirmed on the call before anything is scheduled, and the scope is agreed before any work begins.
Check the thermostat first to confirm it is set to the correct mode and that the temperature setting is calling for heat or cool. Check the circuit breaker for the air handler and outdoor unit to see whether either has tripped.
If neither of those is the issue, call (425) 599-1559 and describe what the system is doing.
We will scope the problem on the phone and confirm the rate before sending anyone out.
Weak airflow from the vents, warm air blowing from an AC that should be cooling, a system that turns on and off in short bursts, or unusual noises like grinding, rattling, or banging all indicate something needs attention. These symptoms can point to different underlying causes, so catching them early usually means a smaller repair than waiting until the system stops working entirely. If the system is running but not conditioning the air the way it should, that is a good time to call. We are available every day from 5:00 AM to 8:30 PM.
Yes. We are available every day of the week, including weekends, from 5:00 AM to 8:30 PM. Weekend availability covers the same full range of services as weekday calls: repair, maintenance, installation quotes, and emergency response.
Call (425) 599-1559 and we will confirm what the schedule allows.
When you call for a repair, a replacement quote, or a seasonal tune-up, the rate is given on the phone and confirmed before anything is scheduled. That covers the diagnostic fee for repair calls, the scope of a replacement estimate, and what a maintenance visit includes. You know what you are agreeing to before anyone comes out. Ask what the visit covers and you get a straight answer.
Lead times vary by season. Spring and fall are the busiest periods for tune-ups and pre-season maintenance, so booking a few weeks out during those months is worth doing. Repair calls and emergency situations are handled as quickly as the schedule allows, and we take short-notice work when it is available.
Call (425) 599-1559 and we will tell you what the current schedule looks like.
A system that has needed the same repair more than once in a short stretch, or that keeps failing in different ways, is worth evaluating for replacement rather than patching again. We will look at the age of the equipment, the refrigerant type, and the repair history to give you an honest read on whether the next repair makes financial sense. If replacement is the better answer, we put together a quote on the same call. Equipment sized for the space rather than for the last unit makes a real difference in long-term performance.
Turn the system off at the thermostat and do not run it until it has been inspected. A burning smell can indicate an electrical issue inside the air handler or furnace, and running the system can make the underlying problem worse.
Call (425) 599-1559 and describe what you heard or smelled.
We will scope the situation on the phone and confirm the next step before anyone comes out.
Property managers and building owners can call the same number for any heating or cooling work across their properties. We handle repair calls, planned maintenance, system replacements, and emergency response when a tenant reports a no-heat or no-cool situation. The job is scoped on the call, the rate is confirmed before anything is scheduled, and the work is carried out locally.
Call (425) 599-1559 to discuss what your properties need.
Call ahead and let us know the situation when you book. We will confirm what access is needed and work out the details on the phone before the visit. For some jobs, access to the outdoor unit and a way into the mechanical space is enough. For others, someone needs to be present to walk through the system and authorize any work. We will tell you which applies to your job when we scope it.
Lynnwood HVAC Company covers the full range of heating and cooling work: AC repair and installation, furnace repair and replacement, heat pump service and electrification, ductless mini-splits, ductwork, thermostats, indoor air quality, and emergency calls. Residential and commercial work across Lynnwood and Snohomish County, every day from 5:00 AM to 8:30 PM.
Call (425) 599-1559 for a quote.
Simple scheduling. Clear rates. Comfort back fast.
We cover the full range of heating and cooling work for homes and businesses across Lynnwood and Snohomish County. Whether the job is a straightforward tune-up, a first-time cooling installation, or a full heat pump replacement, the rate and scope are confirmed on the call before anything gets scheduled. The table below lays out what each service covers and who it fits best.
| HVAC Service | What the Service Includes | Common Needs | Things to Know |
|---|---|---|---|
| Indoor Air Quality & Air Filtration | Whole-home filtration upgradesMedia air cleaner installationVentilation improvements | Households concerned about allergens, wildfire smoke, or stale indoor air | A filtration upgrade works best when the duct system is in good shape, so ductwork is checked when the symptoms point that way |
| Full System Installation & ReplacementMost Popular | Load calculation before equipment is orderedEquipment sized for the actual spaceFull system commissioning and test | Homeowners replacing aging equipment or upgrading from resistance heat or an older gas furnace | Equipment sized to the actual heating and cooling demand of the home runs more efficiently and lasts longer than a unit matched only to the last system |
| Heat Pump Repair & Service | Reversing valve diagnosisRefrigerant charge checkHeating and cooling mode verification | Homes where the heat pump runs but does not heat or cool as expected | A heat pump that struggles below freezing may need a refrigerant adjustment or a control repair rather than a full replacement |
| Emergency HVAC Service | No-heat and no-cool callsSystem-down diagnosisUrgent repair for rental properties and residences | Any situation where heating or cooling has stopped and waiting is not an option | Emergency calls are answered every day from 5:00 AM to 8:30 PM, and the job is scoped on the call so you know what to expect before anyone arrives |
| Seasonal Maintenance & Tune-Ups | Pre-season equipment checksFilter, coil, and airflow inspectionEarly identification of components showing wear | Homeowners and landlords who want to catch small problems before they become expensive mid-season failures | Scheduling a heating tune-up in fall and a cooling check in spring means the system is ready before the demand peaks |
| Ductwork Repair & Sealing | Leak detection at connections and branch runsMastic sealant or metal tape applicationAirflow verification after sealing | Homes with uneven temperatures, high energy bills, or rooms that never reach the set temperature | Leaks at the air handler and trunk connections are the most common source of conditioned air escaping into attics and crawl spaces |
| Thermostat & Smart-Control Installation | Programmable and Wi-Fi thermostat installationCompatibility check with existing equipmentSetup and system verification after install | Homeowners upgrading from a basic thermostat or adding remote control to an existing system | Not every smart thermostat works with every system, especially heat pumps with auxiliary heat stages, so compatibility is confirmed before anything is ordered |
| Heat Pump Electrification | Ducted and ductless heat pump configurationsReplacement of gas, resistance, or oil heating systemsCold-climate models suited to western Washington winters | Snohomish County homeowners moving away from gas or older electric resistance heat under Washington utility and state policy incentives | Modern cold-climate heat pump models hold output well below freezing, which suits this region better than older designs that lost efficiency in cold weather |
| First-Time AC & Ductless Cooling Installation | Central AC added to existing forced-air systemsDuctless mini-split for homes without ductworkEquipment sizing to actual square footage and insulation level | Lynnwood homes built without cooling that are adding it for the first time after recent heat events | Washington has one of the lowest central AC adoption rates in the country, but that is changing fast after back-to-back record summers |
| Heating & Furnace Repair | Gas furnace diagnosticsHeat exchanger inspectionIgnition and control board checks | Any home or rental property where the furnace has stopped heating or is running erratically | A furnace blowing cold air often points to an ignition or limit-switch issue, both of which show up in a standard diagnostic |
| AC Repair & Service | Condenser and compressor checksRefrigerant leak diagnosisAirflow and coil troubleshooting | Homeowners with an AC that is blowing warm air, short-cycling, or not keeping up | Catching a refrigerant or capacitor issue early usually means a simpler repair than waiting until the system stops entirely |
| Ductless Mini-Split Installation | Single-zone and multi-zone configurationsRooms or additions without existing ductworkAirflow and layout assessment before install | Homes without ductwork, additions, or rooms that never reach the right temperature | A multi-zone system can handle several rooms from one outdoor unit, which avoids the cost of adding ductwork to an existing home |
| Wildfire-Smoke Air Filtration (MERV-13+) | Upgrade from standard filters to MERV-13 or media air cleanersAir handler and duct compatibility checkFine particulate capture for smoke events | Households in western Washington dealing with recurring smoke from Eastern Washington or British Columbia wildfires | A tighter filter needs the air handler to move air against added resistance, so the system is checked before any filtration upgrade is recommended |
Call (425) 599-1559 to get a rate confirmed and a visit scheduled for any heating or cooling job in the Lynnwood area.
(425) 599-1559